-3002-

Installation:
6 inches clearance on all sides is
recommened. Circuit breaker and fuse access is through a hinged door on the left of the machine.

Electrical:
208 volt single phase
(3 wire w/ground). 70 amp service for 55 amp maximum current.
8 foot typ 8-4SO power cord from lower left rear.

Water:
1/4” flexible hose with shut off valve is supplied from the lower right rear. No drain is required. Backflow preventer not required.

Exhaust:
A 12 inch diameter hood on 8 inch galvanized vent pipe to 400 CFM updraft blower is recommended. Install hood 3 to 5 inches above exhaust.

Notes:
Weight: 364 lbs.
Casters are standard.
All Dimensions given in inches.

ETL Listed: UL-197, NSF STD 4, CSA C22.2 STD 109 U.S. Patent No. 5394623